The installation of this product is very simple, It is mainly divided into the following steps:


Step 1.Fix the device on the existing rearview mirror with straps.


Step 2.Wire the power cable around the trim of the vehicle.


Step 3.Insert the car charger into the cigarette lighter and connect the USB cable.


Step 4.Run the write for the rear camera through to the back of the car hiding all the wire behind the trim along the way.


Step 5.Mount the back-up camera.


Step 6. Ignite the vehicle to check the camera.


Note: If you want the rear camera to also works as a parking camera, you need to wire the rear camera switch wire into the reversing light circuit.


Connect the red back-up cable to the "+" terminal of the car's back-up signal light. Consult the professional if there is need.